MZ7730 (ABS) Filter nozzle
Other · Published product specifications and images

0.5 t/h filter nozzle
| Material | ABS |
|---|---|
| Flow rate | 0.5t/h |
| Connection | Male thread |
| Thread | M30 |
| Overall length L | 292mm |
| Stem diameter Φ | 30mm |
| Stem length L1 | 247mm |
| Thread length L2 | 25mm |
| Head diameter Φ | 77mm |
| Slot width | 0.25mm / 0.4mm / 0.7mm / 1mm / 2mm |
| Filtration area | 250mm² / 400mm² / 700mm² / 1125mm² / 600mm² |
More models and frequently asked questions
Overview
MZ7730 (ABS) is a 0.5 t/h filter nozzle in the Other. Material: ABS; Published flow rate: 0.5t/h; Connection: Male thread.
Features
This model: Connection: Male thread; Thread: M30; Overall length L: 292mm; Stem diameter Φ: 30mm; Stem length L1: 247mm; Thread length L2: 25mm; Head diameter Φ: 77mm; Slot width: 0.25mm / 0.4mm / 0.7mm / 1mm / 2mm; Filtration area: 250mm² / 400mm² / 700mm² / 1125mm² / 600mm².
Applications
For concrete filter plates where embedded fittings were omitted, including unthreaded concrete plates and precast plates that cannot accommodate a conventional filter nozzle.
Selection notes
When selecting a model, check its material, flow rate, connection, thread, installation dimensions, slot width and filtration area. Confirm any project requirements not shown on this page before purchasing.
MZ7730: frequently asked questions
- What is MZ7730 (ABS)?
- MZ7730 is a published model in the Other, made from ABS. Its full internal model is MZ7730/ABS.
- What specifications are published for MZ7730 (ABS)?
- Material: ABS; Flow rate: 0.5t/h; Connection: Male thread; Thread: M30; Overall length L: 292mm; Stem diameter Φ: 30mm; Stem length L1: 247mm; Thread length L2: 25mm; Head diameter Φ: 77mm; Slot width: 0.25mm / 0.4mm / 0.7mm / 1mm / 2mm; Filtration area: 250mm² / 400mm² / 700mm² / 1125mm² / 600mm².
- What should be checked before selecting MZ7730 (ABS)?
- Confirm that Material: ABS; Flow rate: 0.5t/h; Connection: Male thread; Thread: M30; Overall length L: 292mm; Stem diameter Φ: 30mm meet the purchasing requirements. Parameters not displayed are not currently available in the published data.